Best Pour-Over Coffee Kit 2026: Hario V60, Chemex, Kalita Wave, Bodum, and Fellow Stagg compared

Top picks

• #1
  ☕

  Hario V60 Ceramic Dripper 02

  ~¥2,000-¥2,500. The global reference-standard pour-over dripper. Spiral ribs run the full cone height for even drainage; large single apex opening drains fast for clear, bright extraction. Ceramic body holds heat significantly better than plastic versions. High skill ceiling — technique errors show directly in the cup.

  Global reference-standard pour-over — 2,000-2,500 yen, ceramic body holds heat well, spiral ribs ensure even drainage, produces the clearest origin-character cup in this comparison. High skill ceiling: technique errors show directly in the cup. V60 02 filters are widely available and inexpensive.

  Direct affiliate links not yet available in your region.

  Search on Amazon →
• #2
  🫙

  Chemex Classic Series 6-Cup

  ~¥6,000-¥7,000. Batch pour-over brewer and server in one borosilicate glass vessel. Thick bonded paper filters produce the cleanest, lightest-bodied cup in this comparison. Brews up to 900 ml (3-4 full mugs) per batch. Chemex-specific filters required; glass carafe is not insulated.

  Batch pour-over and design object — 6,000-7,000 yen, brews 3-4 full mugs in one batch, borosilicate glass brewer and server in one. Chemex's thick bonded paper filters produce the lightest, cleanest cup here. Glass carafe is not insulated; Chemex-specific filters cost more and are harder to find locally.

  Direct affiliate links not yet available in your region.

  Search on Amazon →
• #3
  〰️

  Kalita Wave 185 Stainless Dripper

  ~¥5,000-¥6,000. Flat-bottom dripper with three small drainage holes that even out flow rate and absorb pour inconsistencies. Stainless steel body survives drops unlike ceramic or glass. Fuller-bodied extraction than V60; requires Wave-specific ripple papers; three holes need periodic cleaning.

  Forgiving flat-bottom daily driver — 5,000-6,000 yen, stainless steel survives drops, three-hole drainage produces even extraction that absorbs pour inconsistencies. Fuller body than V60; Wave-specific ripple papers required; three holes need periodic cleaning to stay clear.

  Direct affiliate links not yet available in your region.

  Search on Amazon →
• #4
  ☕

  Kalita Wave 185 Stainless

  ~$40-55. Stainless steel, 2-4 cup capacity, dishwasher safe. Most durable Wave — no breakage risk, travel-friendly, good heat retention. Correct for most households.

  Forgiving flat-bottom daily driver — 5,000-6,000 yen, stainless steel survives drops, three-hole drainage produces even extraction that absorbs pour inconsistencies. Fuller body than V60; Wave-specific ripple papers required; three holes need periodic cleaning to stay clear.

  Direct affiliate links not yet available in your region.

  Search on Amazon →
• #5
  🔩

  Bodum Pour Over Coffee Maker with Permanent Filter

  ~¥3,000-¥3,500. Stainless steel mesh permanent filter passes coffee oils for French-press-adjacent body without any paper filter cost. Cone-shaped frame sits on most mugs. Mesh requires immediate post-brew rinse before grounds dry; glass carafe breaks on impact.

  Zero-paper-cost metal filter option — 3,000-3,500 yen, stainless mesh passes coffee oils for French-press-adjacent body. No paper filter running cost. Mesh needs immediate post-brew rinse to prevent grounds drying in the holes; glass carafe will break on impact.

  Direct affiliate links not yet available in your region.

  Search on Amazon →
• #6
  🎛️

  Fellow Stagg [X] Pour-Over Set

  ~¥18,000-¥22,000 for the set with gooseneck kettle. Cone dripper with a base valve for steep-and-release immersion mode — the most beginner-forgiving extraction method in this comparison. Uses V60 02-compatible cone papers. Valve mechanism adds one decision point per brew; price is 8-10x the Hario V60 Ceramic.

  Complete pour-over starter kit with steep-and-release valve — 18,000-22,000 yen for the set including gooseneck kettle. Steep-and-release mode is the most beginner-forgiving extraction in this comparison. Price is 8-10x the Hario V60; valve adds a decision point per brew session.

  Direct affiliate links not yet available in your region.

  Search on Amazon →

What separates one pour-over dripper from another

Pour-over drippers look like simple pieces of ceramic, glass, or stainless, and the marketing implies that any cone or flat-bottomed shape will produce café-grade coffee if you pour slowly enough. The actual variables are more specific. Filter geometry — cone versus flat-bottom versus chimney — determines how the water flows through the coffee bed, where it channels, and whether the extraction is even or not. A cone dripper (V60, Chemex) concentrates flow toward the center point, producing faster drainage, cleaner mouthfeel, and higher sensitivity to grind size. A flat-bottom dripper (Kalita Wave) spreads the bed across a flat surface with multiple small holes, evening out flow rate and making the extraction more forgiving of grind inconsistency. The difference is not subtle for a brewer paying attention: the same coffee, same grind, same pour technique will produce a lighter, brighter cup in a V60 and a fuller, more rounded cup in a Kalita Wave.

Filter type adds another layer. Paper filters — whether Hario's tabbed V60 filters, Chemex's thick bonded paper, or Kalita's wave-shaped papers — absorb most of the coffee oils, including the diterpenes cafestol and kahweol that influence mouthfeel and, in long-term daily consumption, cholesterol levels slightly. Metal or cloth filters (Bodum's stainless mesh, cloth alternatives) pass these oils into the cup, producing a heavier, fuller-bodied brew that sits between paper pour-over and French press in mouthfeel. This is not a quality difference — it is a style preference — but it matters for buyers with dietary or flavour reasons to care.

Brew capacity is stated in cups but 'cup' means different things across brands. Hario's V60 02 is rated for 1-4 cups at roughly 120 ml each (Hario's standard 'cup' is smaller than a mug). Chemex's 6-Cup is rated for up to 900 ml using Chemex's scale where 1 cup equals 150 ml. Kalita Wave 185 is rated for 2-4 cups. In practice: Hario V60 02 produces a generous mug for one person or two small cups; Chemex 6-Cup produces 3-4 full mugs (around 200 ml each) and is the batch option in this comparison; Kalita Wave 185 is similar to V60 in real yield. Buyers expecting to brew a pot for the morning and have cups waiting should buy the Chemex. Buyers brewing one cup at a time should choose V60, Kalita, Bodum, or Fellow Stagg [X] based on flavour preference and cleanup tolerance.

How we compared

We evaluated each dripper on five criteria. First, extraction character — the flavour profile the filter type and geometry reliably produce, based on the physics of flow rate, extraction time, and filter material. This is the most honest criterion we can report without a refractometer lab: the V60's thin cone filter and single large drainage spiral produce fast, high-clarity brews; the Chemex's thick bonded paper filter and chimney shape produce an ultra-clean, wine-like cup with near-zero body; the Kalita Wave's flat bed and three small holes produce even, forgiving extraction with more body than the V60; the Bodum's stainless mesh filter produces a French-press-adjacent full body; the Fellow Stagg [X]'s flow restrictor and steep-and-release mechanism add control that other drippers do not offer.

Second, paper filter cost for daily use. A 100-pack of Hario V60 02 filters costs roughly 700-900 yen on Rakuten; at one filter per day that is 2,800-3,600 yen per year. Chemex filters (Chemex-specific square-fold papers) cost around 1,200-1,500 yen for 100 on Rakuten; at one per day, 4,400-5,500 yen per year. Kalita Wave 185 papers cost around 900-1,100 yen for 100; at one per day, 3,300-4,000 yen per year. Bodum and Fellow Stagg [X] use reusable filters or included permanent filters, so paper cost is zero or near-zero — relevant for daily brewers tracking consumable costs. Third, cleanup friction — the number of steps and time required after each brew session. Fourth, skill ceiling — how much the dripper amplifies or forgives technique errors. Fifth, durability and failure modes — ceramic chips, glass breaks, stainless warps.

We did not blind-taste coffee from each dripper under controlled conditions. Blind tasting without controlling for water temperature, grind size, and dose weight produces noise, not signal. The flavour profiles described here are sourced from the brew chemistry of each dripper's geometry and filter material, backed by the consistent patterns in barista-community reviews. We cross-checked Rakuten and Amazon Japan owner reviews as of May 2026 for usability, durability, and cleaning comments, reading several hundred comments per dripper where available.

Where each fits

If you want the global reference-standard pour-over with maximum transparency and the full skill ceiling of manual brewing, Hario V60 Ceramic Dripper 02 at around 2,000-2,500 yen is the starting point for almost every serious hand-pour brewer. The V60 02 uses Hario's proprietary 01-degree spiral ribs that run the full height of the cone interior, creating an air gap between the paper filter and the ceramic wall that allows even water drainage without suction. The single large opening at the apex drains fast: a typical 20 g dose / 300 ml brew will drain in 2.5-3.5 minutes with medium grind, producing a cup with clear fruit or floral notes from lighter-roast specialty beans and a clean sweetness that filter paper achieves by removing the oils responsible for heavier mouthfeel. The ceramic body holds heat well (significantly better than plastic versions), preheating with a rinse pour reduces heat loss to under 2°C for the duration of a 3-minute brew. Cleanup is one step: discard the filter with grounds, rinse the ceramic briefly. The honest weakness is structural and immediate: the V60 rewards a precise pour. The fast drainage means that an inconsistent pour — irregular flow rate, pouring directly on the edges of the filter rather than the coffee, failing to maintain a steady spiral — produces uneven extraction that shows up in the cup as a mix of over-extracted bitter notes and under-extracted sour notes from the same grounds. For specialty single-origin beans with distinct fruit character, the V60 is the best option in this comparison at any price. For a beginner who pours inconsistently or a daily drip drinker who wants a decent cup without technique, the V60's sensitivity is a daily frustration. Hario V60 Ceramic 02 is the right pick if you have or are building pour technique, you care about extraction clarity and origin character, and you buy quality whole beans.

If you want to brew 3-4 full mugs at once with a design-led piece that doubles as a countertop object, Chemex Classic Series 6-Cup at around 6,000-7,000 yen is the batch pour-over pick. Chemex's borosilicate glass carafe and wooden collar design is one of the most recognized objects in 20th-century American industrial design (it has been in MoMA's permanent collection since 1943), and it functions as a brewer and server in one piece, eliminating the need for a separate carafe. The Chemex's 6-Cup model holds up to 900 ml, enough for 3-4 generous mugs from a single brew — the most practical batch option in this comparison. The Chemex uses its own bonded square-fold paper filter, which is 20-30% thicker than standard cone filters and removes both coffee oils and fine sediment more thoroughly than any other filter in this comparison. The resulting cup is strikingly clean and light-bodied — closer to a bright, transparent tea in mouthfeel than the full-bodied French press-adjacent pour you get from Bodum — with very high clarity on acidity and aroma. The honest weakness is also structural: because Chemex filters are Chemex-specific (thicker paper, square fold, bonded edges), they cost more per filter than generic cone papers and are harder to find in Japanese supermarkets or convenience stores at the last minute. More critically, Chemex's glass carafe has no insulation — brewed coffee sitting in the Chemex drops to below comfortable drinking temperature within 10-12 minutes, which is fine if you pour immediately but awkward if you brew and then get distracted. The wooden collar is held by a leather cord that requires drying after each wash, and many owners replace the cord after a year when the leather cracks. Chemex Classic 6-Cup is the right pick if you brew for multiple people, you want one vessel that brews and serves, and you prefer a super-clean light-bodied extraction.

If you want a more forgiving flat-bottom dripper that produces consistent results even with an imprecise pour or a slightly inconsistent grind, Kalita Wave 185 Stainless at around 5,000-6,000 yen is the practical daily-driver pick. The Kalita Wave's distinctive flat-bottom design uses three small drainage holes rather than a single apex opening, spreading the flow across the bottom of the grounds bed instead of concentrating it at the center. This fundamentally changes extraction dynamics: water contacts the entire coffee bed more evenly, flow rate is slower and more consistent, and small variations in pour technique do not produce the dramatic extraction imbalance that the V60's fast-draining cone geometry amplifies. For a daily brewer who is not obsessively calibrating pour rate and grind size every morning, the Wave produces noticeably more consistent cups from session to session. The stainless steel body is also the most durable option in this comparison — it will not chip, crack, or break on contact with a hard counter, unlike ceramic V60 or glass Chemex. The Wave-specific rippled paper filter sits in the flat base without touching the dripper walls, and the ripples maintain an even air gap around the full filter circumference, which is part of the geometry that prevents channeling. Cleanup is similar to V60: discard filter with grounds, brief rinse. The honest weakness: the Wave's forgiving geometry comes with a flavour trade-off. The slower, more even extraction tends to produce rounder, fuller cups with slightly more body than the V60, which is exactly what many daily drinkers prefer — but for specialty single-origin beans where brightness and distinct acidity are the point, the Wave rounds off some of the character that a skilled V60 pour would preserve. The three small holes can also become restricted if fine grounds or oil residue build up over time, requiring periodic cleaning with a small brush or toothpick. Kalita Wave 185 Stainless is the right pick if you want consistent daily results without a demanding pour technique, you value durability over aesthetics, and you appreciate a fuller-bodied cup.

If you want a zero-paper-cost metal filter option and you prefer a heavier-bodied cup closer to French press than to traditional filtered coffee, Bodum Pour Over Coffee Maker with Permanent Filter at around 3,000-3,500 yen is the lowest-barrier entry into metal-filter pour-over. The Bodum includes a stainless steel mesh filter that sits inside a cone-shaped frame, passes the full range of coffee oils into the cup, and eliminates the need to buy paper filters altogether — the permanent filter is the only filter the machine ever needs, rinsed briefly under the tap after each brew. The cup profile is distinctly different from paper-filter pour-over: heavier body, more pronounced coffee oils in the mouthfeel, fine sediment in the last few sips if the grind was too coarse, richer and less acidic than paper-filtered V60 from the same beans. For drinkers who find V60 or Chemex cups too light or too acidic, the Bodum's oil-inclusive extraction is a feature. The honest weakness is in the mesh: a stainless steel mesh passes very fine particles that thick paper filters catch, producing a slightly muddy last sip and requiring a slightly coarser grind to avoid sediment in the cup. Cleanup is also more involved than paper: the mesh filter requires rinsing immediately after use to prevent fine coffee grounds from drying into the mesh holes, and a weekly deep rinse under running water or a soak in a small amount of white vinegar removes the oil film that accumulates. The Bodum carafe is borosilicate glass, which is heat-resistant and clean-looking but will break on impact — not as durable as the stainless Kalita Wave. Bodum Pour Over with Permanent Filter is the right pick if you want metal-filter body and oil character, you brew for 1-2 people daily, and eliminating paper filter cost matters.

If you want precise extraction control with a flow restrictor and steep-and-release mechanism, and you want a complete pour-over set in one purchase, Fellow Stagg [X] Pour-Over Set at around 18,000-22,000 yen is the enthusiast-kit pick. The Stagg [X] is a cone dripper (60-degree cone angle, steeper than V60's 60-degree nominal to reduce the active bed depth) with a specific feature the others lack: a valve at the base that can be closed to allow the coffee to steep before releasing for extraction, combining pour-over flow control with a brief immersion phase similar to a hybrid between Clever Dripper and V60. The included gooseneck kettle (the 'set' version) provides the controlled pour that the Stagg [X]'s design rewards. The Stagg [X] uses standard paper cone filters (Hario V60 02 filters fit), so consumable cost is equivalent to V60. The cup profile at the default open-valve pour-over mode is similar to V60 but slightly fuller-bodied due to the steeper cone angle slowing drainage marginally; with the valve closed for 30-45 seconds before opening (immersion mode), the cup gains body and sweetness at the expense of the brightness that defines traditional pour-over. The honest weakness is price. At 18,000-22,000 yen for the set, the Stagg [X] costs 8-10 times the Hario V60 Ceramic 02. For the additional cost you get the valve mechanism (which most experienced pour-over brewers do not find necessary once they have a consistent technique), a gooseneck kettle (genuinely useful but available separately for 3,000-5,000 yen), and Fellow's premium aesthetic. If you already have a gooseneck kettle, the Stagg [X] dripper alone is around 6,000-8,000 yen and the comparison to V60 is closer. Fellow Stagg [X] Pour-Over Set is the right pick if you want a complete do-it-all first pour-over kit, you appreciate the steep-and-release control option, and the premium price is not a constraint.

Paper filter cost and cleanup over a year

For a one-cup-per-day brewer, paper filter cost is a genuine long-term variable. Hario V60 02 filters: 100 for 700-900 yen on Rakuten as of May 2026, so roughly 2,600-3,300 yen per year. Generic cone filters (many fit the V60 02 geometry, though Hario's own produce slightly better extraction quality): as low as 400-500 yen per 100 from domestic brands. Kalita Wave 185 filters: 100 for 900-1,100 yen, or 3,300-4,000 yen per year. Chemex filters: Chemex-branded 100-pack at 1,200-1,500 yen, so 4,400-5,500 yen per year. Chemex filters are the most expensive and least substitutable — third-party papers that fit the chimney format exist but produce a different cup than the original thick bonded paper. Bodum's permanent stainless mesh filter has no paper cost. Fellow Stagg [X] uses V60 02-compatible cone papers, so paper cost is identical to Hario. The only realistic paper-cost-saving choice is Bodum's metal filter, but Bodum's oil-inclusive cup is a flavour trade-off, not a free win.

Cleanup comparison. V60 and Kalita Wave: remove the paper filter (which wraps the grounds for zero-mess disposal), rinse the ceramic or stainless dripper under tap water for 20 seconds, done. Total: under 1 minute per session. Chemex: remove the filter (same as above), rinse the wide-mouth glass carafe — the neck is wide enough for a long bottle brush, which Chemex sells as an accessory — and the wooden collar is best air-dried rather than towel-dried to avoid mold at the knot. Total: 1.5-2 minutes. Bodum: remove the permanent metal filter, tap out grounds over the bin, rinse immediately under the tap before grounds dry into the mesh, rinse the glass carafe. If grounds dry into the mesh, soak for 5 minutes in water. Total: 2-3 minutes per session, more if the mesh dries. Fellow Stagg [X]: empty filter, rinse the dripper and the valve mechanism — the valve is the one moving part and benefits from a weekly disassembly to clear any ground residue. Total: 1-2 minutes for the dripper, slightly more for valve cleaning once per week.

Over a year of daily brewing, the cleanup difference between V60 (fastest) and Bodum (slowest) is roughly 5-10 minutes per week, or 4-8 hours per year. For most people this is not a decision-making variable, but for buyers who find even minor daily friction accumulates into 'I stopped using it,' V60 or Kalita Wave minimise post-brew time.

Skill level required and what happens when technique is off

Hario V60 Ceramic 02 is the highest-skill-ceiling dripper in this comparison. The fast drainage and cone geometry amplify technique errors into detectable flavour outcomes. Too-fast pour: water bypasses the grounds bed by running down the filter walls, under-extracting. Too-slow pour: over-saturation of the grounds bed near the end, bitter notes in the final third. Pouring directly onto the filter edge: wet the edge instead of the grounds, uneven extraction across the bed. Grind too coarse: fast drain, sour and thin. Grind too fine: clogged drain, bitter and over-extracted. The V60 is essentially a sensor for technique and grind quality. This is why specialty coffee baristas use it — the clarity of the cup tells you exactly what your technique is doing. It is also why beginners who have never hand-poured often produce disappointing cups from the V60 for the first 2-4 weeks. The skill ceiling is real, but it is also learnable: most brewers with a scale and a 3-day practice rhythm produce reliable cups by the end of the first week.

Kalita Wave 185 is the most forgiving dripper. The flat-bottom geometry and three-hole drainage slow and even out the flow in a way that absorbs pour inconsistencies without the dramatic extraction swings the V60 produces. A brewer who pours erratically, gets distracted mid-pour, or uses a grind that is slightly off will produce a decent cup from the Wave where the same inputs into a V60 would produce a noticeably unbalanced one. The trade-off is flavour ceiling: the Wave's forgiving geometry also levels off the extraction expressiveness — you cannot extract the same brightness and clarity from the Wave that a skilled brewer coaxes from the V60, because the slower, more even extraction rounds the cup's edges.

Chemex's learning curve is moderate. The thick paper filter slows drainage substantially, requiring a consistent circular pour to avoid the water pooling on one side of the filter and creating a channeling path. The 6-Cup batch size also means that brew time runs 5-7 minutes for a full 900 ml, and maintaining consistent pour temperature and flow rate over 5 minutes requires a gooseneck kettle and a timer — without these, the back half of a Chemex brew often over-extracts as the water temperature drops and the contact time lengthens. The cup rewards technique: a well-executed Chemex produces one of the cleanest, most complex cups in this comparison. A lazy Chemex pour produces a flat, slightly bitter batch.

Bodum with permanent filter is low-skill but with a different failure mode: grind. Because the metal mesh does not restrict flow as much as paper, grind size determines the extraction rate more directly than in paper-filter drippers. Too coarse and the water rushes through, under-extracting. Too fine and the mesh clogs and the brew backs up. The Bodum is forgiving of pour technique but demands a reasonably consistent grind — which means that for brewers using a cheap blade grinder rather than a burr grinder, the Bodum's lack of filter-buffering makes grind inconsistency more visible. Fellow Stagg [X]'s valve mechanism adds control at the cost of one more decision point per brew session. In standard pour-over mode (valve open), it behaves like a steeper V60 and requires similar technique. In steep-and-release mode, the immersion phase reduces pour-technique sensitivity because the coffee is extracting evenly during the steep regardless of exact pour pattern, then drains in a burst when the valve opens. For beginners, steep-and-release mode is actually the most forgiving extraction method in this comparison — it combines the even extraction of immersion with the clarity of a paper cone filter.

Verdict

For most specialty-coffee drinkers brewing for one or two people and willing to spend 2-3 weeks learning a consistent pour, Hario V60 Ceramic Dripper 02 at 2,000-2,500 yen is the default recommendation. The price makes getting started low-risk, the ceramic holds heat well, the global user base means tutorials and grind-recipe databases are extensive (James Hoffmann's 2021 V60 video alone has millions of views and a well-tested recipe), and the cup clarity it produces with good technique and good beans is the clearest expression of origin character in this comparison. If you ever want to go further into specialty coffee, the V60 is what the community uses as a reference.

Choose Chemex Classic 6-Cup at 6,000-7,000 yen if you brew for 3-4 people, you want brewer and server in one, and you prefer the cleanest possible cup with near-zero body and high clarity. Accept the Chemex-specific filter cost and the glass fragility as the price of the design and batch capacity. Choose Kalita Wave 185 Stainless at 5,000-6,000 yen if you want consistent daily results without a demanding pour, you prefer a fuller-bodied cup than V60 produces, or you want a dripper that survives a drop without breaking. Choose Bodum Pour Over with Permanent Filter at 3,000-3,500 yen if you want metal-filter body, you dislike the running cost of paper filters, and you are comfortable with a more thorough cleanup routine. Choose Fellow Stagg [X] Pour-Over Set at 18,000-22,000 yen if you want a complete starter kit that includes a gooseneck kettle, you want the steep-and-release valve option, and you do not want to source components separately.

articles.best-pour-over-coffee-kit-2026.conclusion

Frequently asked questions

Does the dripper shape really change how coffee tastes, or is it mostly about the beans and grind?

Both matter, but the dripper changes the cup in detectable ways that persist even when beans and grind are held constant. The clearest demonstration: brew the same coffee with the same grind on a V60 and a Kalita Wave back to back. The V60 cup will be lighter, brighter, and more acidic; the Kalita Wave cup will be fuller-bodied, rounder, and slightly less acidic. The same coffee, same grind, same water temperature, different dripper geometry. The reason is extraction dynamics: the V60's fast-draining cone extracts at a higher flow rate, producing more clarity and less contact time; the Wave's flat-bottom three-hole drain extracts at a slower, more even rate, producing more body and less brightness. Beans and grind define the ceiling — you cannot extract nuance from poor beans no matter what dripper you use — but the dripper determines what fraction of that nuance ends up in the cup and in which direction.

Do I need a gooseneck kettle for pour-over, or will any kettle work?

A gooseneck kettle is not required for Kalita Wave or Bodum with permanent filter. The Wave's forgiving geometry can absorb a slightly uncontrolled pour from a standard kettle, and the Bodum's metal filter does not depend on pour precision. A gooseneck kettle makes a real difference for V60 and Chemex, where controlled pour rate and the ability to target specific areas of the coffee bed directly affect extraction quality. If you are starting with a V60 and budget is a constraint, buy the V60 first, brew with whatever kettle you have, and assess whether the lack of a gooseneck is limiting your results after a week. Many V60 brewers get good results from a standard kettle by simply pouring more slowly and more deliberately. Fellow Stagg [X] Set includes the kettle, which is one of the genuine value propositions of the set format at its price point.

Can I use V60 papers in other cone drippers, or do I need specific filters for each?

Hario V60 02 cone papers are compatible with any 60-degree cone dripper of equivalent size, including Fellow Stagg [X] and most third-party cone drippers. They do not fit the Chemex (which needs Chemex-specific square-fold papers or Chemex-compatible papers from some third-party brands) or the Kalita Wave (which uses the Wave's specific ripple-shaped flat papers). Kalita Wave papers are not interchangeable with any other dripper. Bodum uses a permanent metal filter and no papers. The practical implication: if you own both a V60 and a Fellow Stagg [X], you can buy one type of paper for both. If you add a Chemex or Kalita Wave, each requires its own filter stock.